DYMET
Technology & Equipment
DYMETTechnology & Equipment |
| Blend name | Base metal | Additives | Destination | Remarks |
| K-80-13 A-80-13 |
Aluminum | Alumina Zink |
Build up material to restore shape and volume of metal parts. | The small volume of zink additive serves to prevent nozzle clogging. |
| K-20-11 A-20-11 |
Aluminum | Alumina Zink |
Sealing up material to fill slits and holes in metal parts. | The volume of zink additive promotes holes and slits plugging. |
| K-00-11 Z-00-11 |
Zink | Alumina | Corrosion protection at local areas of steel constructions. | . |
| K-01-01 C-01-01 |
Copper | Alumina | Build up material to improve electric and heat conductivity. Electric contacts and conducting lines at any metals and ceramic. Coating for soldering. | Aluminum sublayer is required at ceramic substrate. |
| K-01-11 C-01-11 |
Copper | Alumina Zink |
Sealing up material to fill slits and holes in metal parts. Build up material for operating temperatures up to 800o C. | The volume of zink additive promotes holes and slits plugging. |
| K32 N3-00-02 |
Nickel | Alumina | Protective coating in agressive and high temperature media. Build up material. | . |
| K714 N7-00-14 |
Nickel | Alumina Zink |
Sealing up material to fill slits and holes in metal parts, build up material for operating temperatures up to 1200o C. | The volume of zink additive promotes holes and slits plugging. |
| T2-00-05 | Tin | Alumina | Protective coating at electric contacts. | . |
| TP-63-25 | Tin alloy | Alumina | Protective coating at electric contacts. ___ Sn(63%)-Pb alloy | . |
| B83-100-40 | Babbit B83 | . | Restoration of slide bearings cast-on babbit B83. ___ Sn(83%)-Cu-Sb alloy | Special tool SBB-03 is required. |
| P1-00-01 | Lead | Alumina | Corrosion protection in aggresive media. Porosity and screws sealing up. | . |
| K-00-04-16 | . | Alumina | Blasting media to prepare substrate surface. | Increased nozzle insert wear. |
| Blend name | Base metal | Additives | Destination | Remarks |
| K-20-01 A-20-01 |
Aluminum | Alumina | Build up material to restore aluminum part shape. Microscopic leakages sealing up . Corrosion protection. | Nozzle insert clogging is possible. |
| K-10-01 A-10-01 |
Aluminum | Alumina | Build up material to restore aluminum part shape. Microscopic leakages sealing up . Corrosion protection. | Nozzle insert clogging is possible at upper temperature settings. |
| K-10-04 A-10-04 |
Aluminum | Alumina | Prime layering for nickel and copper coating deposition to ceramic substrates. | Increased nozzle insert wear. |
| A-20-10 | Aluminum | Zink | Conducting coatings at glass substrate. | Regular deposits buildup at nozzle walls. |
| C-03-10 | Copper | Zink | Conducting coatings for soldering at glass substrate. | Reduced bond strength. Aluminum sublayer is recommended. |
| C-01-00 | Copper | . | Auto-limited thickness coating for soldering. | Reduced deposition efficiency. Rough substrate surface is required. |
| K-00-04-02 | . | Alumina | Blasting media for ceramic and other sensitive surfaces. | Increased nozzle insert wear. |